Issue
- How do you connect a V300 WiFi cradle (base) to a 4RE in-car system?
Environment
- Product: V300
- Technology: Bodyworn Camera
- Business Process: In-Car Video System Integration
Resolution
To connect the V300 WiFi cradle to the 4RE system, follow these steps:
Installation and Connection Process:
1. Position and Install the WiFi Base Antenna:
- Mount the antenna inside the vehicle windshield at least 2–3 inches away from metal.
- Ideally, install the antenna at the upper center area of the windshield, behind the rearview mirror.
2. Secure the WiFi Base:
- Mount the WiFi Base bracket, if not already installed, and attach the WiFi Base.
3. Run and Connect the Antenna Cable:
- Route the WiFi Base antenna cable to the WiFi Base and securely connect it.
4. Wire to the Smart Power Switch:
- Connect the WiFi Base cable to the WiFi Base, then run this cable to the Smart Power Switch. Connect it to the Base 1 connector port on the Smart Power Switch.
5. Final Setup:
- Ensure the Smart Power Switch and 4RE DVR are properly connected.
Notes:
- The WiFi Base acts as a WiFi hotspot and pairs with the V300 body camera to establish a recording group.
- Ensure that all cabling follows the prescribed order to prevent component damage.
For detailed cable connections and adjustment configurations, refer directly to the installation guide.
If further assistance is needed, please get in touch with technical support at 1-800-MSI-HELP