Issue
How to Clone an APX4000 with 1 knob to an APX4000 with 2 knobs
Environment
APX4000
1 knob
2 knob
Resolution
Cloning is not supported between 1-knob and 2-knob radio.
APX4000 either 1 knob or 2 knob - no model kit difference (i.e. H51UCF9PW6AN)
This is a known limitation and is not a defect.
Workaround:
1- Open the 1-knob customer codeplug that will be used to clone from in one session of the CPS.
2- Open the 2-knob default codeplug in the 2-knob radio in a second CPS session
3- Top node Drag&drop from session 1 to session 2. Configure the radio knobs (under Radio Ergonomics -> Controls -> Switches) in the newly modified codeplug and save it.
4- Use this newly modified 2-knob codeplug to clone the new 2-knob radios.
Note: When doing a Top Node Drag & Drop between a 1-knob and 2-knob radio the settings for the radio knobs do not change, therefore they need to be configured to the desired functionality. It does not matter if it is 2-knob to 1-knob or 1-knob to 2-knob.